Description
Mounting |
| 1) Constructed from 16-gauge steel,die-formed construction for max heat dissipation and rust protection |
| 2) Precision tooled springs secure trim to mounting frame for effortless and tool-less installation |
| 3) Compatible with C-channel, flat bar, wood joist bar ahanger and EMT. |
| 4) Fully assembled for ease of installation |
| 5) Non-IC housing require a minimum clearance of 3″ around from thermal insulation and 1/2″ from combustible material from above the fixture |
| 6) Ceiling thickness: 1/2″-3/2″ |
Junction Box |
| 1) Pre-wired junction box provided with 1/2″ and 3/4″ knockouts, romex kncokouts with pry-out slots and strain clamps |
| 2) Provided with removable access plates |
| 3) Knockouts equipped with pry out slots |
| 4) All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads |
| 5) Through branch circuit wiring(4 in, 4 out) |
Reflector Option |
| 1) High quality reflector with 1.2mm thickness avalable finishes and types in multiple architectural finishes and types |
| AF4S-LED |
| AF4S-LED-EM With Emergency System |
| 2) Optional painted white flange is available |
| 3) Single position optics eliminate possibility of specified lamp being installed in incorrect position |
Thermal Protector |
| 1) Meet ETL requirements |
| 2) Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material |
| 3) External thermal device located on the junction box wrap |
Listing |
| ETL listed for damp location W/Feed through |
Packing |
| 50.5 X 36 X 16 CM 2PCS/CT |
Reviews
There are no reviews yet.